Hi.
When i change firmware i can't see "firmware partition". I try difrent drivers :/.
Screen:
http://img519.imageshack.us/my.php?image=beztytuuxy2.jpg

Please help!

please post pics of your player and try and explain a little better what you want to do

are you trying to change the firmware

what have you done so far

thanks

I change firmware for this:
http://www.mympxplayer.org/rockchip-firmware-rk2706-dmtech-dm-mp910-df927.html
Unfortunately this firmware doesn't work for my player :/
I repair in this way:
http://www.mympxplayer.org/rockchip-based-player-went-blank-vt11084.html

When i connect player to the usb i can't see "partiotion with firmware" ; however i see this: http://img152.imageshack.us/my.php?image=beztytuuai7.jpg

Sorry for my English
Thanks

Copy this file to the root of the memory:

frk.tag

Then you will have acces to the hidden part with the firmware.

If this not work you need to rename the file, I think makd511 will be able to give you the different names. I had the list but lost it, sorry

try and rename the rkusb.tag file to teclast.sys

did you make a copy of your original firmware for your player

It doesn't work :/
http://img530.imageshack.us/my.php?image=beztytuule5.jpg

did you make a back up of your firmware??

download these files

http://www.ebay.vpunk.co.uk/recovery tool.7z

locate the file called setup.rkw

copy this to your player at the start/root of the drive

disconnect the player safely from windows

if player is on turn it off

now connect the player again

windows might now detect a new hardware

if it does it will ask to install the device

install the device BUT when it asks for DRIVERS make sure you tell windows to look for drivers in the folder called "Rk27 Driver" included in the download

do this and see if it will now re activate the partition

..and if that doesn't work you might also like to use the "R" button on RK27DM.exe (Rockchip Device Manager) program just to get your player into rockUSB mode - (monitor this in remove hardware icon manager)

Then you can use the Upgrade tool to install the firmware folders (no rkusb.tag needed)

download upgrade tool here:-
http://www.mympxplayer.org/rockchip-rk27-upgrade-v25-df881.html

Player needs to be in RockUsb mode to use this, remember to check this in remove hardware icon manager)


So

1) If your player is dead and your firmware partition is damaged then connect it to usb.
2) Run RK27DM.exe and load in any RKW firmware.
3) If the R button is active just press it, (if no R button is active then install the rockusb27.sys driver)
4) Click YES on the 2 message boxes that come up and watch for the RockUsb icon (in remove hardware)
5) when you get the icon close the RK27DM.exe program (still with the RockUSB icon active)
6) Run the upgrade tool you just downloaded.
7) Load firmware folders into upgrade tool.
8 ) Press the upgrade button and watch it do it's thing
9) When finished you just need to format the main 8GB memory in Fat 32

I used this method to recover my player when i corrupted the firmware by shutting the pc down with the player connected.. It worked a treat for me, but remember it doesn't work if your firmware partition is good. but you can use teclast.sys or rkusb.tag on a good partition instead..

cheers knob for posting that

the file i have uploaded is the small file used by the prgram when clicking the R button (recover)

i tried my method with an mp4nation user that bricked their s:flo and could not get the prigram to run at all, it worked and windows kicked into life when reconnected, so its kind of a shortcut to using the program that may not work on certain computer, i have asked the user here to try this to see if it will work again

BTW i have an english version of the prog noe new 1.41 version, i will upload later, its from ramos v8 player but will be good for recovery

cheers

makd511
1. I have back up firmware
2. When i copy setup.rkw & reconect player i see error:
http://img152.imageshack.us/my.php?image=beztytuuai7.jpg

knob

1. I doesn't have rock usb icon:

2. It doesn't work: http://img402.imageshack.us/my.php?image=beztytuupu5.jpg

can you restart your machine and try another USb port on your computer please

seems to be s problem with your computer and the usb drives, do you hav another omputer you can try these routines on???

when you did this routine first
http://www.mympxplayer.org/rockchip-based-player-went-blank-vt11084.html

how well did that go, did you complete all the routines

I am traying in second computer (doesn't work) :/
Stupid Error.

what happened when you tried the method that i posted

did windows ask for any drivers at all at any point

do you safely disconnect the player from the computer

i have just do ne this myself on my broken machine

at what point does the error come up ... as soon as you plug in the player?????

Windows doesn't ask for any drivers even that if i remove drivers, instead of i see:

Quote: › discover a new equipment

,

Quote: › New equipment is ready for use

and error. (no disc)
"http://img152.imageshack.us/my.php?image=beztytuuai7.jpg "

makd511 wrote (View Post): › ......... do you safely disconnect the player from the computer ......

Yes

makd511 wrote (View Post): › at what point does the error come up ... as soon as you plug in the player?????

When windows discover player.