grvtman, Your version of firmware 9.1.50 can not be modified at the moment.

Can we modify the theme for 9.0.48 firmware now?Plz Pm me if u can.thx.

sorry , i meant 9.0.51 ..


where the hell did that come from lol

does anybody know how to do this with a SIGMAtel chip player?

thanks in advance

noobguy,

Currently there isn't a tool available that will modify Sigmatel chip based players unfortunately.

Hello everyone!!
I would like to know what happens to my FirmWare because this is what will appear if I extracted my firmware:
..............................................................
s1fwx v2.6 - copyright (c) 2005 wiRe (http://www.s1mp3.de/)
dump s1 firmware from flash into file...

-------------------------------------------------------------------------------
NO WARRANTY NOTE

BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE
PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE
STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE
PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND
PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM CAUSE DAMAGE TO
ANY KIND OF DEVICE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR
OR CORRECTION.

IF YOU DONT AGREE TO THIS TERMS THEN PRESS ESC NOW!
-------------------------------------------------------------------------------

scan for devices...
detected drives: <f>

..<z> select device
<.> scan for devices
<?> display help
<~> exit program

$F
connect to device 'F:\'...
init device...
set device to f-mode...
get info from device...
device = 'LISONG MP3 Player'
manufacturer = 'Wilson Co. Ltd.'
firmware type = 'F285'
firmware version = 9.0.48
read boot record...
detect firmware size...
error: The system cannot read from the specified device.

warning: unknown firmware file
read flash...
error: The system cannot read from the specified device.

write to file 'dump.bin'...

---[ info ]--------------------------------------------------------------------
filename = 'dump.bin'
filetype = afi
md5 = 9EA9AEC26310943E6CC47E223C028365

---[ info:afi ]----------------------------------------------------------------
file id = 'AFI '
vendor id = 0x6977
product id = 0x6552
version = 9.0.48
date = 00/00/0000

+---filename---+ +---size---+ +-type-+ +---+ +--chksum--+
| BRECF285.BIN | | 16kb | | F285 | | B | | C557B73F |
| FWIMAGE.FW | | 6mb | | | | I | | 383F104C |
+--------------+ +----------+ +------+ +---+ +----------+

---[ info ]--------------------------------------------------------------------
filename = 'dump.bin.FWIMAGE.FW'
filetype = unknown
md5 = DA6A0D097E307AC52ED9B4AD551801FC

disconnect from device...
success.
Press any key to continue . . .
.......................................................................................................

My question is...Why is that there is only two filenames can be found in my firmware which is the "BRECF285.BIN" and "FWIMAGE.FW"..???

AND if I try to load it in a program-"s1res" an error message will appear...
"An attempt was made to load a program with an incorrect format"
why is that so??

and if there's a firmware just like mine....would you please email it here
titans_kill@yahoo.com
if you would mind.......PLZ.

Can someone help me?

I've downloaded a Theme from the forum and I'm trying to skin my MP4 using that theme.

So I've extracted my firmware with s1fwx, and then I've browsed the files inside my ui30.res with s1res! That theme would work perfectly!

But there are over 300 images and with s1res I have to import the images one by one!!

Is there a simple method?

Tks!

As far as I know, you have to change them one by one...

I just bought a 1.8 inch mp4 player on ebay. i am new to this site and have no idea about changing the themes. I don't now what to do. i have a pic of the player. know it has 9.0.50 Firmware PLZ HELP!!!!!!!!!!!!!!!!!![img]http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=120155423190&ssPageName=STRK:MEWN:IT&ih=002#ebayphotohosting[/img]

Is it possible to modify the firmware on this version?

XTD_91N51_V5 9.1.52



I tried using the developmental tool s1fwx_v32 to extract my firmware but I got the image above. Any ideas?

hello everybody
why any mp4 or mp3 player that carry v 9.x.xx when we make bakup in reading flash
[read flash...
error: The system cannot read from the specified device.] and bakup bin faild to bakup player and kill it?

I tryed this whit my nordic mp4 player (LS10V12 AK1025_LKD_V30M 2007-10-08 9.1.52) , but when I opten dump.bin file into s1res, I see nothing, only "[AFI]" , and botton of that program reads:
"Ready (0 boot records, 0 frimware files, 2 unknow files, 0 errors"

So any help?

EDIT: I noticed that I have same problem what others having too...

EDIT: I taked risk and tryed my new'er mp4 player, but same problem, annoying...